Operating temperature: 32° to 95° F (0° to 35° C).3.5-mm audio minijack for analog or optical digital sound 3Įlectrical and Environmental Requirements.USB 2 port for connecting a USB printer.10/100BASE-T Ethernet LAN port for connecting a computer, Ethernet hub, or networked printer.10/100BASE-T Ethernet WAN port for connecting a DSL modem, cable modem, or Ethernet network.Simultaneous dual-band 802.11n wireless.Bonjour for Windows available for free download.AirPort Utility for iOS available for free download.AirPort Utility for Mac available for free download.Wireless security (WEP) configurable for 40-bit and 128-bit encryption.NAT, DHCP, PPPoE, VPN Passthrough (IPSec, PPTP, and L2TP), DNS Proxy, SNMP, IPv6 (6to4 and manual tunnels).Interoperable with 802.11a, 802.11b, 802.11g, and 802.11n-enabled Mac computers, iOS devices, Apple TV, Windows-based PCs, and other Wi‑Fi devices.Channels 1-13, 36-64, and 149-165 approved for use in Australia, Hong Kong, and New Zealand.Channels 1-13, 36-64, and 100-140 approved for use in Europe and Japan.Channels 1-11, 36-116, and 132-165 approved for use in the United States and Canada.Radio output power: 20.5 dBm maximum (varies by country).If you are looking to use an Airport Express on your eero network to play iTunes, please visit this Apple FAQ. After a moment or two, your eero will assign the Time Capsule or Airport Extreme its own IP address and the AirPort hard drive should appear on any device connected to your eero network. Then use an Ethernet cable to connect one of your eeros to your Time Capsule or Airport Extreme’s WAN port.At this point, disconnect your laptop, re-enable your Wi-Fi, and connect your laptop to your eero Wi-Fi network. Once done, press ‘Update’ and your Time Capsule or Extreme will reboot and save your changes.This setting means that IP address assignment is passed onto your eero, which you’ll connect as your primary router. Under the ‘Router Mode’ drop-down, select ‘Off’ (Bridge Mode). Select the ‘Wireless’ tab and find the drop-down menu under ‘Network Mode.’ Then select ‘Off’ to disable any wireless networks created by your Time Capsule or Extreme.Then launch Airport Utility and select AirPort Time Capsule or AirPort Extreme from the window and press edit.We recommend turning off WiFi to make sure you’re only connected to your AirPort device. Make sure your computer is connected only to the Airport device and not to the network of another router or modem.Next, connect your laptop to your Time Capsule or Extreme using an Ethernet cable plugged into one of the AirPort’s LAN ports.First, unplug all the Ethernet cables to disconnect it from your existing network. This way, you’ll be able to control your network’s advanced features via the eero app.īridging your AirPort Extreme or Time Capsule: We recommend that you bridge your AirPort device, which essentially turns it into a network-enabled hard drive and gigabit switch. If you’re connecting either an AirPort Extreme or a Time Capsule to your eero network, you’ll have to disable the wireless and routing functions on either your Airport device or your eeros.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |